Posts

Showing posts from April, 2022

How to Know When Your House Needs Leveling

Image
  Over time the structure of your home can shift. A house that is out of level and not corrected will continue to decline until the building becomes unsafe. It can take years for serious issues to arise, but as soon as you realize you need house leveling in Killeen, TX, it is time to call the professionals .  Signs that your house might need leveling include: Gaps in Mortar Joints If there are gaps in the mortar of your foundation, it is likely settling unevenly.  Cracks on the Interior & Exterior Cracks on interior and exterior surfaces indicate something is causing pressure where it shouldn’t. Ceilings, walls, and floors mean you should probably call someone to check the foundation.  Previous Repairs Look into the history of the home for information on previous work done on the house. These can include foundation repairs, mortar patches, and latch replacements.  Doors & Windows Sticking A common problem is doors or windows that won’t open or close properly. You might notice i

5 Tips for Installing Wood Flooring

Image
  While your Copperas Cove, TX, DIY flooring installation seems like a great idea to save money, it is not always as simple as it looks. Your home improvement project will go a lot more smoothly if you keep a few tips in mind: Examine Your Subfloor You need a relatively level subfloor, with height changes less than 3/16″ over a 6′ span. Screw down loose boards or use a floor leveling putty to smooth out uneven sections.  Acclimate the Wood If you install the wood before it has acclimatized to the room, it could cup. However, some movement is natural, so leave a ¼” gap around the perimeter to accommodate any fluctuations.  First Row Must be Straight If the first row is off even a fraction of an inch, that fraction will grow exponentially over the length of the room.  Top Nail & Glue the Boards You’ll likely end up with boards in spaces where the nailer will not fit, and you will need to top nail or face nail. Use wood glue to bead the groove of the previous board, and then use scra